Cheapest Richard Mille Watches: Entry References Ranked

October 28, 2026|Filip Biczak

Richard Mille RM 016 extra-flat white gold skeleton watch

The cheapest Richard Mille is usually an extra-flat RM 016 or an RM 033, with the RM 005, RM 010 and RM 67-01 close behind, and every one of them still costs more than almost any steel Rolex or Omega you can name. In the sourced catalogue we work from, the entry point sits in the high five figures to low six figures in US dollars, depending on case material, condition and papers. This guide ranks the entry references in order, explains what separates the cheapest piece from the next step up, and sets out what to check before you commit. Bizak & Co. is a sourcing desk: every watch below is sourced to order, not held as stock.

Last reviewed on October 28, 2026 by Filip Biczak. Price statements here are loose bands, not quotes; use the from-prices on the linked listings as a starting point.

Which is the cheapest Richard Mille watch?

The extra-flat RM 016 and the RM 033 are the usual answers, and the RM 016, typically in titanium, is the one most often cited at the bottom of the range. Both are slim dress watches with skeletonised movements, but the RM 016 has a rectangular case while the RM 033 is round, and neither is a complication watch: the RM 016 shows hours, minutes and date, the RM 033 just hours and minutes. Richard Mille does not publish a full public price list for current models, so "cheapest" really means the lowest asking level among dealers and the secondary market on a given day. Pre-owned examples of the earlier RM 005 and RM 010 often sit in the same neighbourhood, and the gap between all of these is smaller than most buyers assume.

Entry references ranked from lowest to highest entry level

This ranking reflects where each model typically starts in the catalogue we source from, not a fixed price list, and it can reorder with condition and material.

RM 016 and RM 033 (extra-flat): usually the lowest entry, in the high five figures to low six figures.
RM 005: the brand's first automatic, often found pre-owned in titanium at a similar low-six-figure level.
RM 010: the hours, minutes and date automatic; low six figures, rising with gold and special editions.
RM 67-01: one of Richard Mille's current extra-flat automatics, alongside the RM 16-02 (the current model in the RM 016 line) and the sport-version RM 67-02; low to mid six figures depending on case metal.
RM 011, RM 035 and RM 030: the most popular families, starting in the low to mid six figures and climbing with ceramic and carbon cases.

Tourbillons and limited editions sit on another scale altogether and are quoted individually, so they are not entry pieces. For the wider spread across the brand, see our Richard Mille vs Rolex price gap guide and the Richard Mille collection.

How do the entry Richard Mille references compare?

They differ mainly in function, case thickness and the family they belong to. The table uses manufacturer-described features only.

Reference	What it is	Functions	Typical case materials
RM 005	The brand's first automatic model	Hours, minutes, seconds, date	Titanium, gold
RM 010	Automatic with a skeletonised dial	Hours, minutes, date	Titanium, gold, ceramic
RM 016	Extra-flat automatic	Hours, minutes, date	Gold, titanium
RM 033	Extra-flat automatic	Hours, minutes	Titanium, gold
RM 67-01	Current extra-flat automatic; calibre CRMA6 is 3.60 mm thick	Hours, minutes, date	Titanium, gold, carbon
RM 011	Felipe Massa flyback chronograph	Chronograph, annual calendar	Titanium, gold, ceramic
RM 035 / RM 35-03	Rafael Nadal ultralight; the RM 35-03 is automatic	Hours, minutes	Carbon TPT, Quartz TPT, light alloys
RM 030 / RM 30-01	Automatic with declutchable rotor	Hours, minutes, seconds, date, power-reserve and rotor-clutch indicators; the RM 30-01 adds a function selector	Titanium, red gold (limited Carbon TPT and ceramic editions)

Confirm the exact variant of any watch before relying on this table, because Richard Mille releases many editions of each family.

Why is there such a price gap between Richard Mille models?

Three things move the price: case material, complication and rarity. A titanium time-and-date watch is the simplest to make and the most plentiful, so it sits at the bottom. A gold case lifts the price because of the metal and the finishing. A flyback chronograph, a ceramic or carbon case, or an athlete edition adds machining time and scarcity on top. Condition and papers matter too: a complete set with box and warranty documents commands a premium over a watch that is missing them. That is why two watches that look alike on a shelf can sit in very different price brackets.

Is the cheapest Richard Mille a good starting point?

It can be, if you want the brand's look and engineering in its quietest form. The extra-flat pieces wear slimly and read as dress watches, which suits daily use better than a bulky chronograph. The trade-off is resale: the most liquid references are usually the RM 011 and RM 035 families, because more buyers look for them. If an eventual sale matters to you, ask what a buyer would pay for your exact reference, material and condition, and treat an asking price as an ask, not a bid.

What do you pay beyond the watch?

Servicing is the running cost to plan for. Richard Mille advises a service every three years, which is far more frequent than the roughly ten-year interval Rolex suggests, and it adds up over time. Insurance and the cost of a secure shipment also scale with value. Budget for these before you compare asking prices, because the cheapest watch is not always the cheapest to own.

What should you check before buying an entry Richard Mille?

Full reference and material. A suffix can mean a very different watch and a very different price.
Warranty papers. Look for the warranty card and the activation card paired to the serial number.
Serial numbers. The case, papers and any service receipts should agree.
Service history. Ask when it was last serviced and what was done.
A price far below the market. Replica Richard Mille watches circulate widely, so treat a bargain as a warning sign. Our authenticity page explains what we inspect.

For Spanish-speaking buyers, our guide Reloj Richard Mille: precios y modelos covers the same ground in Spanish.

Quick answers

What is the cheapest Richard Mille watch?

Usually an extra-flat RM 016 or an RM 033, with the RM 005, RM 010 and RM 67-01 close behind. In our sourced catalogue the entry level sits in the high five figures to low six figures.

Can you buy a genuine Richard Mille for a bargain price?

Not realistically. A listing far below the market band is more likely a replica or a scam than a bargain, so verify papers and serial numbers before paying.

Which entry Richard Mille is easiest to resell?

The RM 011 and RM 035 families usually have the most buyers, while the extra-flat dress models appeal to a narrower group. Resale depends on the exact reference, material and condition.

Is a pre-owned Richard Mille cheaper than a new one?

Often slightly, but the larger difference is availability. Boutique allocation is limited, so many buyers use the secondary market.

Does Bizak & Co. hold these watches in stock?

No. We source each watch to order, confirm the specific unit, photographs and price with you before you commit, and you can reserve a search with a $200 deposit credited to the price.

Get your Richard Mille sourced

Tell us the model, size, dial and strap preference, whether you want new or pre-owned, and your budget and timing, through our sourcing enquiry form. We confirm the specific watch, photographs and final price before you commit, and you can reserve it with a $200 deposit credited to the price.